HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

9 - 1
Data Transmission
Using the Storage Mirroring commands, you can perform the following functions to manage your
connections.
 Controlling transmission manually on page 9-1
 Controlling a target manually on page 9-3
 Scheduling transmission criteria on page 9-4
 Setting bandwidth limitations on page 9-8
Controlling transmission manually
You can stop, start, pause, or resume transmission.
1. To start the transmission process, use the transmission start command.
NOTE: As noted in the Scripting Guide Introduction on page 1-1, this guide does not explain
Storage Mirroring features and functions, only the scripting aspects of Storage Mirroring.
For details on the different features and functions, see the Storage Mirroring User’s
Guide.
Command TRANSMISSION START
Description Initiates the transmission process
Syntax
TRANSMISSION START <target>
Options target—Name of the target, an IP address on the target, or a virtual IP
address. Depending on the network route Storage Mirroring uses to access
the target, you may need to specify the fully qualified domain name.
Examples
transmission start beta
Notes Target names that contain non-alphanumeric characters must be enclosed in
quotation marks.