HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

9 - 4
Scheduling transmission criteria
You can clear an existing schedule, disable or enable the use of a schedule, and set start, stop, and
window criteria.
1. To clear all existing transmission options, use the schedule clear command.
2. Enable transmission limiting when you want to apply any transmission options that have been
configured. You can also disable the transmission options without losing your settings. Use either
of the following two commands to disable or enable transmission limiting.
Command SCHEDULE CLEAR
Description Clears the existing transmission schedule for the specified target
Syntax
SCHEDULE <target> CLEAR
Options target—Name of the target, an IP address on the target, or a virtual IP
address Depending on the network route Storage Mirroring uses to access the
target, you may need to specify the fully qualified domain name.
Examples
schedule beta clear
Notes Target names that contain non-alphanumeric characters must be enclosed in
quotation marks.
NOTE: All transmission options are stored on the source machine until they are either cleared
or the option is updated. At this time, there is not a command to display the existing
transmission options.
Command SCHEDULE ENABLE
Description Enables the transmission schedule
Syntax
SCHEDULE <target> ENABLE
Options target—Name of the target, an IP address on the target, or a virtual IP
address Depending on the network route Storage Mirroring uses to access the
target, you may need to specify the fully qualified domain name.
Examples
schedule beta enable
Notes Target names that contain non-alphanumeric characters must be enclosed in
quotation marks.
Command SCHEDULE DISABLE
Description Disables the transmission schedule without clearing the schedule data
Syntax
SCHEDULE <target> DISABLE
Options target—Name of the target, an IP address on the target, or a virtual IP
address Depending on the network route Storage Mirroring uses to access the
target, you may need to specify the fully qualified domain name.