HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

9 - 10
4. If you want to review the schedule for a target, use the limit bandwidth schedule list
command.
5. If you need to remove a scheduled event, use the limit bandwidth schedule remove
command.
6. To clear the schedule use the limit bandwidth schedule clear command.
Command LIMIT BANDWIDTH SCHEDULE LIST
Description Displays the bandwidth schedule for a target
Syntax
LIMIT BANDWIDTH SCHEDULE LIST <target>
Options target—Name of the target, an IP address on the target, or a virtual IP
address. Depending on the network route Storage Mirroring uses to access
the target, you may need to specify the fully qualified domain name.
Examples
limit bandwidth schedule list beta
Notes Target names that contain non-alphanumeric characters must be enclosed in
quotation marks.
Command LIMIT BANDWIDTH SCHEDULE REMOVE
Description Removes a scheduled bandwidth event
Syntax
LIMIT BANDWIDTH SCHEDULE REMOVE <label> FROM <target>
Options
 label—Unique name identifying the existing bandwidth schedule event
that you want to remove
 target—Name of the target, an IP address on the target, or a virtual IP
address. Depending on the network route Storage Mirroring uses to
access the target, you may need to specify the fully qualified domain
name.
Examples
limit bandwidth schedule remove weekdays from beta
Notes Options that contain non-alphanumeric characters must be enclosed in
quotation marks.
Command LIMIT BANDWIDTH SCHEDULE CLEAR
Description Clears a bandwidth schedule
Syntax
LIMIT BANDWIDTH SCHEDULE CLEAR <target>
Options target—Name of the target, an IP address on the target, or a virtual IP
address. Depending on the network route Storage Mirroring uses to access
the target, you may need to specify the fully qualified domain name.
Examples
limit bandwidth schedule clear beta
Notes Target names that contain non-alphanumeric characters must be enclosed in
quotation marks.