HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

13 - 9
Editing failover configuration
1. Retrieve your monitor information by using the monitor get command.
2. Review the current failover settings by using the monitor display command.
3. If you need to edit any of the failover settings, use the failover configuration commands used to
establish the failover configuration. See Configuring failover on page 13-1.
Command MONITOR GET
Description Retrieves and displays the machines that are currently being monitored by
the specified target machine
Syntax
MONITOR GET <target>
Options target—Name of the target, an IP address on the target, or a virtual IP
address
Examples
monitor get beta
Notes Monitor names that contain non-alphanumeric characters must be enclosed
in quotation marks.
Command MONITOR DISPLAY
Description Displays the monitoring and failover configuration settings for the specified
monitor machine
Syntax
MONITOR DISPLAY <monitor>
Options monitor—Name of the source machine designated as the monitor
Examples
monitor display alpha
Notes
 If you do not specify a monitor, the current source designated as the
monitor will be used. If you have not identified a monitor, you will receive
an error message stating that a monitor has not been selected.
 Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.