HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

14 - 3
5. Initiate failback by using the failback command. If you specified a pre-failback script in your
failover configuration, that script will be executed at this time.
Command FAILBACK
Description Initiates the failback process for the specified monitor machine
Syntax
FAILBACK <monitor> [ON <target>] REMONITOR|NOREMONITOR
Options
 monitor—Name of the source machine designated as the monitor
 target—Name of the target, an IP address on the target, or a virtual IP
address
 REMONITOR—Automatically continues monitoring the source machine
after failback
 NOREMONITOR—Automatically discontinues monitoring the source
machine after failback.
Examples
failback alpha on beta remonitor
Notes Options that contain non-alphanumeric characters must be enclosed in
quotation marks.
NOTE: The source machine must be online and Storage Mirroring must be running to ensure that
the source post-failback script can be started. If the source has not completed its boot
process, the command to start the script may be lost and the script will not be initiated.