HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

15 - 12
HardLinkInterval Specifies the length of time, in seconds, to generate a hard link report
Values: any valid integer
Default:
3600
GUI Setting: None
HardLinkLogPath Specifies the location where hard links will be logged. If no path is specified,
the location defined in LogDir will be used.
Values: any valid path
Default: None
GUI Setting: None
HBLoopback This entry is no longer used.
HBTrace Specifies whether heartbeat debugging information is generated
Values: 0 not generated
1 Generated
Default: 0
GUI Setting: None
HBTTL Number of seconds without receiving a heartbeat before a remote machine is
considered unavailable
Values: 0 - 65535
Default: 10
GUI Setting: None
HeartbeatIgnore
IPs
Indicates the IP address(es) to be ignored by the Management Console. An
ignored IP address will not be displayed in the Management Console servers
tree.
Values: a semi-colon separate list of IP addresses in the format x.x.x.x
Default:
none
GUI Setting: None
HPQueueRatio Ratio of replication packets to one mirror packet
Values: 0 - 65535
Default: 5
A HPQueueRatio of 5 indicates 5 replication packets to
1 mirror packet.
GUI Setting: Server Properties, Source tab, Queue Ratio, Replication
Packets to 1 Mirror Packet
If you change this value, the source service must be stopped and restarted to
implement the change.
IgnoreArchiveBit Specifies if the archive bit is compared during verification
Values:
0 Archive bit is compared during a verification
1 Archive bit is not compared during a verification
Default:
1
GUI Setting: None
Server Setting Description