HP StorageWorks Storage Mirroring Virtual Recovery Assistant user's guide (T2558-96323, April 2009)

5 - 1
Select servers
The Protect a server workflow guides you through all the steps to
protect the physical source server whose data and system state you
will be protecting with a virtual target server.
Select the source machine
When you click Protect a server or select Go, Protect a server, the Select source server window
will appear.
Enter the following information for the source server:
1. Server—Enter the IP address or DNS name of the source server you want to protect. Or, click
the Browse
button to browse to locate a server.
a. In the Browse for server window, browse through the server tree to select a source server.
b. After you have found the source server, select it, then click Choose.
NOTE: In order to protect a source, the source must have no more than four NICs enabled.