HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96078, February 2008)

A - 18
Monitor Stop
Monitor Use
Niclist
Command MONITOR STOP
Description Stops monitoring the source machine for a failure
Syntax
MONITOR STOP <monitor> [ON <target_machine>]
Options  monitor—Name of the source machine designated as the monitor
 target_machine—Name of the target machine that will no longer be monitoring the source
machine
Examples
monitor stop indy on jersey
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command MONITOR USE
Description Specifies the source machine designated as the monitor that will be used in subsequent monitor
commands
Syntax
MONITOR USE <monitor>
Options monitor—Name of the source machine designated as the monitor
Examples
monitor use indy
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command NICLIST
Description Displays the NICs available on the specified target machine. Each NIC is assigned an integer value
and this value is used in the
monitor move command.
Syntax
NICLIST [target_machine]
Options target_machine—Name of the machine
Examples
niclist jersey
Notes  If you do not specify a machine name, the value from the current target will be returned. If you
have not identified a target, no data will be returned.
 If you have not logged into the target machine, no data will be displayed.
 Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.