HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

7 - 3
Controlling an automatic mirror
Use the AutoRemirror option with the get and set commands to configure if a mirror is intiitated
automatically when a connection is automatically reconnected. See Server Settings on page 13-1
for more information on using these commands with a Storage Mirroring program setting.
Configuring and removing orphan files
1. Use the MoveOrphanedFiles, RemoveAllOrphans, , RemoveOrphansTime,
MoveOrphansDir
, and LogAllOrphans options with the get and set commands for orphan
file configuration. See Server Settings on page 13-1 for more information on using these
commands with a Storage Mirroring program setting.
2. To remove orphan files manually, use the orphans start command.
3. If you want to stop removing orphan files after it has been started, use the orphans stop
command.
Command ORPHANS START
Description Manual operation to remove any orphan files on the target
Syntax
ORPHANS START con_id [CLEARRESTOREREQUIRED]
Options
 con_id—Connection ID assigned to the source/target connection
 CLEARRESTOREREQUIRED—Clears the restore required flag and
initiates the orphan operation
Examples
orphans start 1
Command ORPHANS STOP
Description Stops the process to remove orphan files on the target
Syntax
ORPHANS STOP con_id
Options con_id—Connection ID assigned to the source/target connection
Examples
orphans stop 1