HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

13 - 2
The following table lists all of the Storage Mirroring server settings, in decimal values.
Storage Mirroring Server Settings
Notes
 Some settings, although immediately applied to Storage Mirroring, will
not take effect until the service is restarted.
 If you do not specify a machine name, the value from the current source
will be updated. If you have not identified an active source, no changes
will be made.
 Options that contain non-alphanumeric characters must be enclosed in
quotation marks.
Server Setting Description
ActivationCode 16- or 24-character Storage Mirroring activation code
Values: Unique value for each customer
Default: N/A
GUI Setting: Server Properties, Licensing tab, Activation Code
AdapterFlags Specifies the adapter to use when establishing a connection. This option
should not be changed.
Values:
2 Encryption
4 Network Data Representation
Default:
4
GUI Setting: None
Advertisement Indicates how the Management Console populates the server tree.
Values:
1 Uses the Storage Mirroring heartbeat
4 Uses Windows 200x Active Directory
5 Uses both the Storage Mirroring heartbeat and Windows 200x Active
Directory
Default:
5
GUI Setting: Management Console, File, Options, Configuration tab,
Automatic Service Discovery
Changes to this setting require the Storage Mirroring service to be restarted
for the change to take effect. If Active Directory Advertisement is enabled (set
to
4 or 5), there is a 200 byte impact on the Active Directory service for each
server that registers. The Storage Mirroring service registers with Active
Directory at startup and unregisters at shutdown.
AllFailover Specifies which IP addresses to failover
Values:
0 Failover only monitored IP addresses
1 Failover all IP addresses
Default:
1
GUI Setting: Failover Control Center, Monitor Settings, Items to Failover, IP
Address(es)