HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96078, February 2008)

10 - 9
Setting Transmission Criteria Using the Text Client
The Text Client uses the schedule commands to establish scheduled transmission criteria. To control transmission manually
using the Text Client, the transmission command can be used with the stop, start, pause, or resume switches.
Configuring transmission criteria before establishing a connection
After you have specified the source you are working with, establish scheduled transmission criteria using the following various
schedule commands. After you have completed the transmission criteria, establish a source/target connection by following
the steps in
Establishing a new connection on page 6-12.
Clearing all transmission criteria
To clear all existing transmission options, use the schedule clear command.
Enabling and disabling transmission criteria
Enable transmission limiting when you want to apply any transmission options that have been configured. You can also disable
the transmission options without losing your settings. Use either of the following two commands to disable or enable
transmission limiting:
Enable all existing transmission options by using the
schedule enable command.
Disable all existing transmission options by using the
schedule disable command.
Command SCHEDULE CLEAR
Description Clears the existing transmission schedule for the specified or current target machine
Syntax
SCHEDULE <target_machine> CLEAR
Options target_machine—Name of the target machine
Examples
schedule jersey clear
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
NOTE: All transmission options are stored on the source machine until they are either cleared or the option is
updated. At this time, there is not a command to display the existing transmission options.
Command SCHEDULE ENABLE
Description Enables the transmission schedule
Syntax
SCHEDULE <target_machine> ENABLE
Options target_machine—Name of the target machine
Examples
schedule jersey enable
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command SCHEDULE DISABLE
Description Disables the transmission schedule without clearing the schedule data
Syntax
SCHEDULE <target_machine> DISABLE
Options target_machine—Name of the target machine
Examples
schedule jersey disable
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.