HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96078, February 2008)

11 - 22
12. Start monitoring by using the monitor start command.
13. If after starting a monitor you need to stop it, use the monitor stop command.
Storage Mirroring version 4.3
Source Machine: indy (Access Level: FULL)
- Monitor settings for indy -
Flags: ADD, FAILALL
Target Pre-Failover script: /home/username/prefailover
Target Post-Failover script: /home/username/postfailover
Target Pre-Failback script: /home/username/prefailback
Target Post-Failback script: /home/username/postfailback
Source Post-Failback script: /home/username/srcpostfailback
(press any key)
> monitor script add prefailback "/home/username/prefailback"
> monitor script add postfailback "/home/username/postfailback"
> monitor script add srcpostfailback "/home/username/srcpostfailback"
> monitor display
Command MONITOR START
Description The configured failover target starts monitoring the source machine that was designated as the
monitor.
Syntax
MONITOR START <monitor> [ON <target_machine>]
Options  monitor—Name of the source machine designated as the monitor
 target_machine—Name of the target machine that will be monitoring the source machine
Examples
monitor start indy on jersey
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command MONITOR STOP
Description Stops monitoring the source machine for a failure
Syntax
MONITOR STOP <monitor> [ON <target_machine>]
Options  monitor—Name of the source machine designated as the monitor
 target_machine—Name of the target machine that will no longer be monitoring the source
machine
Examples
monitor stop indy on jersey
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.