HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96078, February 2008)

13 - 20
Service 4110 Warning Target can not write %1 due to target
disk being full. Operation will be
retried (%2 times or forever)
The disk on the target is full. The
operation will be retried according to
the TGExecutionRetryLimit setting.
4111 Warning Target can not write %1 due to a
sharing violation. Operation will be
retried (%2 times or forever)
A sharing violation error is prohibiting
Storage Mirroring from writing on the
target. The operation will be retried
according to the
TGExecutionRetryLimit setting.
4112 Warning Target can not write %1 due to access
denied. Operation will be retried (%2
times or forever)
An access denied error is prohibiting
Storage Mirroring from writing on the
target. The operation will be retried
according to the
TGExecutionRetryLimit setting.
4113 Warning Target can not write %1 due to an
unknown reason. Operation will be
retried (%2 times or forever). Please
check the log files for further
information on the error.
An unknown error is prohibiting
Storage Mirroring from writing on the
target. The operation will be retried
according to the
TGExecutionRetryLimit setting.
4120 Info Target write to %1 was completed
successfully after %2 retries.
No action required.
4150 Error Target write %1 failed after %2 retries
and will be discarded. See the event
log or log files for error conditions.
After correcting the problem, you
should re-mirror or run a verify to
resynchronize the changes.
The operation has been retried
according to the
TGExecutionRetryLimit setting but
was not able to be written to the
target and the operation was
discarded. Correct the problem and
remirror the files.
4200 Info In band task %1 submitted from %2 by
%3 at %4
No action required.
4201 Warning In band task %1 discarded (submitted
from %2 by %3 at %4)
A task may be discarded in the
following scenarios: all connections to
a target are manually disconnected,
replication is stopped for all
connections to a target, or an
auto-disconnect occurs. If one of these
scenarios did not cause the task to be
discarded, contact technical support.
4202 Info Running <trigger point> in band script:
%1 (task %2 submitted from %3 by %4
at %5)
No action required.
4203 Success Completed run of in band script: %1
(exit code %2)
No action required.
4204 Error Error running in band script: %1 Review the task and its associated
script(s) for syntax errors.
4205 Warning Timeout (%1 seconds) running in band
script: %2
The timeout specified for the script to
complete has expired. Storage
Mirroring will continue with normal
processing. You may need to manually
terminate the script if it will never
complete.
4206 Warning Run timeout disabled for in band
script: %1
The timeout period was set to zero
(0). Storage Mirroring will not wait for
the script to complete before
continuing. No action is required.
4207 Warning In band scripts disabled by server - no
attempt will be made to run %1
Enable task command processing.
Category ID Severity Message Required Response