HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96078, February 2008)

14 - 17
IPFailover Specifies whether or not to failover the IP addresses during failover
Values:
(
0) Do not failover IP addresses
(
1) Failover IP addresses
Default:
1
LanguagesAvailable Specifies the Storage Mirroring language support that has been installed. Do not modify this
setting. If you need to add or remove language support, use the Storage Mirroring installation
program.
LanguageSelected Specifies the language of the verification log
Values: Depends on LanguagesSupported
Default: Language used during the installation
LanguagesSupported Specifies the available languages for the verification log. Do not modify this setting. If you need to
add or remove language support, use the Storage Mirroring installation program.
LoadSourceTarget Specifies the functionality of the Storage Mirroring daemon
Values:
(0) Neither the source nor target modules are loaded
(
1) Only the source module is loaded
(2) Only the target module is loaded
(3) Both the source and target modules are loaded
Default: 3
This setting will not take effect until the Storage Mirroring daemon has been restarted.
LogAllOrphans Specifies whether orphan files are logged to the Storage Mirroring log on the target
Values:
(0) Do not log the orphan files to the Storage Mirroring log on the target
(
1) Log the orphan files to the Storage Mirroring log on the target
Default: 0
LogDir The location of the Storage Mirroring messages/alerts, verification, and statistics log files
Values: any valid path
Default: /var/log/StorageWorks/StorageMirroring
LogFile The name of the Storage Mirroring messages/alerts log file
Values: any valid file name
Default: DTLog
LogMessageLevel Specifies the types of messages logged to the.dtl files
Values:
(
0) No messages will be logged
(
1) Only alert messages will be logged
(
2) Alert and release messages will be logged
(
3) Alert, release, and debug messages will be logged
Default:
2
LoopbackID This entry is no longer used.
MaxChecksumBlocks Specifies the number of checksum values retrieved from the target
Values: any integer
Default:
32
Program Setting Description