HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96078, February 2008)

A - 12
Monitor Clear
Monitor Create
Monitor Delete
Command MONITOR CLEAR
Description Clears all of the failover configuration and monitoring parameters for the specified monitor
machine
Syntax
MONITOR CLEAR [monitor]
Options monitor—Name of the source machine designated as the monitor
Examples
monitor clear indy
Notes  If you do not specify a monitor, the current source designated as the monitor will be used. If you
have not identified a monitor, you will receive an error message stating that a monitor has not
been selected.
 Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command MONITOR CREATE
Description Establishes a source machine as a failover monitor. This is the machine that will be monitored by a
target machine in case it should experience a failure.
Syntax
MONITOR CREATE <source_machine>
Options source_machine—Name of the machine
Examples
monitor create indy
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command MONITOR DELETE
Description Deletes the specified failover monitor and all of its parameters
Syntax
MONITOR DELETE <monitor>
Options
monitor—Name of the source machine designated as the monitor
Examples
monitor delete indy
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.