HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96078, February 2008)

3 - 5
Specifying Source and Target Functionality
If you did not specify your machine as a source or target when starting the Storage Mirroring you will need to load the modules
using the DTCL commands load source or load target.
To remove a specific functionality, use the unload source or unload target commands.
Command LOAD SOURCE
Description Loads the Storage Mirroring source module
Syntax
LOAD SOURCE <machine>
Options machine—Name of the machine
Examples
load source indy
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command LOAD TARGET
Description Loads the Storage Mirroring target module
Syntax
LOAD TARGET <machine>
Options machine—Name of the machine
Examples
load target jersey
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command UNLOAD SOURCE
Description Unloads the Storage Mirroring source module
Syntax
UNLOAD SOURCE <machine>
Options machine—Name of the machine
Examples
unload source indy
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command UNLOAD TARGET
Description Unloads the Storage Mirroring target module
Syntax
UNLOAD TARGET <machine>
Options machine—Name of the machine
Examples
unload target jersey
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.