HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

152 of 739
The replication set that the Application Manager generates will include the directories
and files needed to protect the selected storage groups. It is recommended that you
protect all storage groups.
Note:
● If you do not select all storage groups, you should make sure that other
backups are available from which to recover the storage groups that are
not failed over.
● HP recommends that you place all query-based distribution groups in a
single organization container and give the target server full control rights
to the container and all child objects.
● Database files with a plus sign (+) in the name cause Application
Manager to fail. You must rename the storage group and files to remove
the plus sign.
You can also select non-application specific data under the Volumes folder.
Note:
If Override Generated Rules is selected on the Advanced tab, this control will
be disabled.
To refresh the tree view to show new source directories or files that may have been
added or removed, select the logical node, then click the Refresh button. If a node in the
volumes branch is selected, then the items under that node will be refreshed.
Mirror type
The following options specify what files you want sent from the source to the target
during a mirror.
● Full—Copies all of the directories and files in the replication set to the target
machine. If a mirror has already been completed, another full mirror will overwrite
the data on the target.
● Checksum—(Default) This option performs a checksum comparison calculation. A
checksum calculation is a formula applied to blocks of data to determine if the
binary make-up of the block is identical. If the checksums on the source and target
machine are the same, the block is skipped. If the checksums on the source and
target machine are not the same, the block on the source is sent to the target. With
this option, the entire file is not overwritten; only the block that is received from the
source is overwritten.
Note: The Mirror type setting also applies to the restoration connection.
Enable compression
This setting enables compression of data that is transmitted from the source to the target.