HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

154 of 739
You should only modify the replication set rules if there are additional directories/files
specific to your configuration that must also be protected with Exchange. Modifying the
default configuration for replication set rules may affect whether data can be successfully
replicated. Do not modify the replication set unless you are very familiar with Storage
Mirroring Recover and Exchange.
Note:
If you want to protect the Badmail folder, you will need to manually add it to the
replication set as described in step 2.
To change the replication set rules:
1. Select the Override Generated Rules checkbox.
Note:
When this box is selected, the Protected Storage Groups control on the
Connection tab will be disabled. For more information, see Protected storage
groups.
2. To add a replication set rule, click Add. The Add Repset Rule dialog box will
appear.
3. In the Rule Path field, type the directory that you want to protect or exclude.
4. In the Include/Exclude area, select whether to include or exclude the path from
the replication set.
5. In the Recursive area, select whether the directory should be recursive (protecting
all sub-folders under the directory) or non-recursive (protecting only the files in the
directory).
6. Click Add.
7. When you have entered all of your replication set rules, click Close to return to the
Advanced configuration tab.
Note:
You will need to manually verify that the rule path is correct since the
Application Manager does not validate rule paths.
8. To remove a rule, select one or more rules, then click Remove.