HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

159 of 739
6. Select the Create Connection checkbox to create the connection between the
source and target using the automatically-generated replication set. This should
only be disabled if you would like to verify the replication set that is created by
Application Manager prior to connection (Default = selected).
7. Select the Create Failover Monitor checkbox to create a failover monitor on the
target to monitor the source for failure. This monitor will use the failover parameters
specified during configuration as well as the script files that have been created
(Default = selected).
8. When you are finished, click OK.
9. If you want to add the target back to the PF list to which the source belongs, you
will need to enable the Restore PF Tree option.
a. Select Tools, Actions.
b. Choose Display Advanced Options.
c. Select Protect Exchange Server again. The Restore PF Tree option will be
added to the Actions menu.
d. Select Actions, Restore PF Trees. This will copy the owning PF tree setting
from the source public folders to the target public folders.
This setting is cleared when protection is enabled, which prevents SMTP queuing
issues when trying to deliver messages to the target, but is never restored. If you
want to have an active target server, you can use this command to restore it to a
Application Manager state.
Next step: Save configuration settings
Saving configuration changes
If you have not done so already, launch the Protecting an Exchange server workflow.
After you have changed the configuration parameters, click OK to apply the settings. If
you click Cancel, any changes you have made will be discarded and the previous
configuration parameters will be used.
When you have finished configuring the optional protection options, continue with
Validate the configuration.
Note:
If you close the Application Manager prior to enabling protection, your changes
will not be saved. You must enable protection in order to save your
configuration settings for a source/target pair.
If you modify your configuration on the source server (such as adding a new
storage group or database), you must disable protection, run validation and fix
any issues, then re-enable protection to apply the changes to the Application
Manager replication set.