HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

186 of 739
Note:
You must first select the database in order for the Target Path commands to be
visible.
In Database Only mode, if there are multiple databases being protected and the
target paths for these databases are changed, it will cause problems mirroring
other databases that are at the same or lower in the directory structure.
For example, if your databases are located in the following paths:
F:\Data\database1.mdf
F:\Data\database1.ldf
F:\Data\Level1\database2.mdf
F:\Data\Level1\database2.ldf
F:\Data\Level1\Level2\database3.mdf
F:\Data\Level1\Level2\database3.ldf
● If the target data path for database3.mdf is changed, it will change the
target path only for database3 files.
● If the target path is changed for database2 files, it will cause the database
paths for database2 and database3 files to be changed.
● If the target path is changed for database1 files, it will cause the database
paths for all databases (in this example) to be changed.
1. Select the database you want to re-map, then click the ellipse button. The Choose
a Target Folder window will appear.
2. Enter the desired path in the Target Path field, then click OK.
Note:
The target database must be either offline or detached from the target before
you can enable protection in the Application Manager. The validation test will