HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

212 of 739
Compression may be used in Local Area Network (LAN) configurations, though it may
not provide any significant network improvements.
You can specify compression for different source/target connections, but all connections
to the same target will have the same compression settings.
By default, compression is disabled. To enable it, select Enable Compression, then set
the level from minimum to maximum compression.
Next step: Configure advanced settings
Configuring advanced settings
If you have not done so already, launch the Protecting a File Server workflow.
The Advanced tab includes advanced configuration options.
The following topics explain how to configure the options on the Advanced tab:
Replication set rules
A replication set defines what directories/files are to be protected by Storage Mirroring
Recover. By default, Application Manager selects all of the necessary directories/files to
protect the file server based on your source server configuration. These include all non-
administrative file shares. By default, the Application Manager-generated replication set
will be named fileprint_<source server name>_<target server name>.
You should only modify the replication set rules if there are additional directories/files
specific to your configuration that must also be protected. Modifying the default
configuration for replication set rules may affect whether data can be successfully