Manualshelf

HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

ManualsBrandsHP ManualsSoftwareHP Storage Mirroring Software Windows Media Kit
261262263264265266267268269270
268 of 739
To protect the Exchange servers, click on the name of the Exchange server under step 2.
The Protect Exchange servers window will appear. For more information about
protecting Exchange servers, see Protecting an Exchange server.
Next step:Protect Exchange server
Validate the configuration
If you have not done so already, launch the Storage Mirroring Recover Application
Manager by selecting Start, Programs, HP Storage Mirroring, Recover, Storage Mirroring
Recover Application Manager.
Click Validate, or select Actions, Validate, to ensure that the source and target servers
are configured correctly for failover. A description of the validation activity being
performed is displayed in the status bar at the bottom of the Application Manager
window, along with status progress indicator. When validation completes, the status
progress indicator is removed.
● If you are using DNS Failover and did not enter DNS credentials on the Configure
Protection window, you will be prompted to enter a user name and password for
accessing/modifying DNS records.
● If the configuration is good, a green checkmark icon will appear next to a validation
message that states that the servers are configured correctly. Continue with Enable
protection.
● If the validation detects potential configuration issues, an icon will appear next to
the message(s). The following table identifies the icons and the validation
conditions that they represent. Double-click on a message to view details
concerning the issue. On the Validation Details window, review the additional
information, and, if available, click Fix and Application Manager will attempt to
resolve the issue. If you would rather address the issue manually, click Cancel.
After correcting any issues, click Validate again to verify the change was made.
Icon Validation Status
Good
Unknown
Error, Fixable—If not fixed, failover cannot occur. Can be fixed by Application
Manager.
Error, Not Fixable—If not fixed, failover cannot occur. Must be fixed manually.
Warning, Fixable—The Application Manager detected an issue that should be