HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

300 of 739
1. Server—Enter the IP address or fully-qualified domain name of the VirtualCenter
server.
2. User name—Enter the user name for the account that will access the
VirtualCenter server.
3. Password—Enter the password that is associated with the user name.
4. If you want Virtual Recovery Assistant to remember the login information, select the
Save VirtualCenter connection informationcheckbox. By selecting this box,
Virtual Recovery Assistant will remember the credentials for logging in to the
VirtualCenter server. The logon information is cached and encrypted, so you will
not need to enter this information again at subsequent logons.
5. When you have finished entering the login information, click Connect. Virtual
Recovery Assistant will verify the credentials that you have entered for the
VirtualCenter server.
If this is your first time to use Virtual Recovery Assistant, you will start by selecting your
source server to protect. Continue with Select the source machine.
Log off VirtualCenter server
Logging off clears the current credentials so that you will be prompted to enter
credentials on your next logon.
To disconnect from the currently-configured VirtualCenter server, click the Disconnect
button in the left pane. A box that identifies the servers that you are currently logged in to
will appear. If you click Disconnect, you will be disconnected from the VirtualCenter
server and your Virtual Recovery Assistant session will end.
When you disconnect from the server, any saved connection information (such as user
name and password) will be deleted.
Next step: Select source machine