HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

320 of 739
Note:
In order to protect a source, the source must have no more than four NICs
enabled.
If you enter the fully-qualified domain name for the server, the Storage
Mirroring Console will resolve the entry to the server short name. This could
result in name resolution issues for servers with the same short name that
reside in two different domains. To avoid this, enter the IP address of the
server.
2. User name—Enter the user name for the account that will access the source
server.
Note:
The user account specified must have Double-Take Admin and local
administrator privileges on the source server.
If this is a domain user account, you may enter a fully-qualified user name.
The fully-qualified user name must be in the format domain\username or
username@domain.
3. Password—Enter the password that is associated with the user account.
4. After all fields have been completed, click Next. A window will display the
progress as the source server is authenticated.
Next step: Select volumes to protect
Selecting volumes to protect
If you have not done so already, launch the Protect an entire server using a Hyper-V
virtual machine workflow.
Select the volumes you want to protect with the target virtual machine. By default, the
system volume will be selected.