HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

321 of 739
You can specify the size of the selected volume on the replica virtual machine.
1. Select the checkbox next to the volume(s) to protect in the Volume table.
2. In the Storage Controller column, select the type of storage controller for the
volume (IDE or SCSI).
Note:
A maximum of three volumes can be attached to an IDE controller. If you are
protecting more than three volumes on the source, you will need to install the
Hyper-V integration components to acquire a SCSI device. Consult your Hyper-
V documentation to determine how to install additional SCSI controllers.
If your source is Windows 2003 or Windows 2008 with no service packs and
you have selected a SCSI controller, you will need to manually install the
Hyper-V Integration Components after failover to attach these volumes to the
replica virtual machine.
3. If you want to change the size of the selected volume:
a. Select the volume in the Volume table.
b. Enter a value in the Size of the selected volume on the replica virtual
machine field.