HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

350 of 739
● No Bandwidth Limit—Data will be transmitted using all available
bandwidth.
● Fixed Bandwidth Limit—Data will be transmitted according to the
user-specified bandwidth configuration. By default, the Unlimited
checkbox is enabled. This configuration is identical to selecting No
Bandwidth Limit. If you want to limit your bandwidth usage, clear this
checkbox. To limit the bandwidth usage, enter the maximum amount of
data you want to transfer per second. You can indicate it by specifying
your Connection Speed and the Percentage of the bandwidth that
you want to use or by entering the Transfer Rate value directly.
i. Click Next to continue.
j. Specify your Storage Mirroring Recover orphan file parameters. By default,
the orphan files feature is disabled. To enable it, select Move/Delete Orphan
Files. Specify if you want to delete or move the files. If you select the move
option, identify the location where these orphan files will be located. Click
Next to continue.
k. Specify your Storage Mirroring Recover compression parameters. By default,
compression is disabled. To enable it, select Enable Compression.
Depending on the compression algorithms available for your operating
system, you may see a slider bar indicating different compression levels. Set
the level from minimum to maximum compression to suit your needs. Click
Next to continue.
l. Specify your Storage Mirroring Recover mirroring settings.