HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

412 of 739
Toolbar
Button
Description
Stop protection—Select a protection, then click the Stop button to disable
protection for the job.
After the initial synchronization has completed, you can use the Stop button
to stop protection for a job. This allows the end user to perform a manual
failover.
Failover—Select a protection, then click the Failover button to shut down
the source virtual machine and start the replica virtual machine.
For more information, see Failing over to the replica virtual machine.
Undo Failover—Select a protection that has already failed over, then click
the Undo Failover button to undo the failover of the selected protection.
The state will change to Undoing. When the Undo Failover is complete, the
job will re-start as normal.
For more information, see Undoing failover.
View protection error—If the selected protection has encountered any error
conditions, click this button to view the most recent error associated with the
protection job.
Toolbar
Button
Description
Configure Protection—Select a protection, then click the Configure
Protection button to open the protection summary for the selected
protection. Click the Change button next to setting you want to modify. For
more information about changing protection settings, see Setting protection
options.
Storage Mirroring Recover for Hyper-V Connection Details Controls