HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

414 of 739
Toolbar
Button
Description
Pause protection—Select a protection, then click the Pause button to
pause the protection job.
Note—All protections that use the same source-to-target route will be
paused.
Stop protection—Select a protection, then click the Stop button to disable
protection for the job.
After the initial synchronization has completed, you can use the Stop button
to stop protection for a job. This allows the end user to perform a manual
failover.
Failover—Select a protection, then click the Failover button to shut down
the source virtual machine and start the replica virtual machine.
For more information, see Failing over Hyper-V virtual machines.
Undo Failover—Select a protection that has already failed over, then click
the Undo Failover button to undo the failover of the selected protection.
The state will change to Undoing. When the Undo Failover is complete, the
job will re-start as normal.
For more information, see Undoing Failover.
Reverse protection—Select a protection that has already failed over, then
click the Reverse protection button to start the protection in the reverse
direction.
The job will start synchronization in the reverse direction. The job name and
the log file name will change accordingly. When the restore completes, the
job will be running in the opposite direction (that is, if the job had originally
been running from server Indy to server Jersey, it will now be running from
server Jersey to server Indy).
For more information, see Reversing Failover.
View protection error—If the selected protection has encountered any error
conditions, click this button to view the most recent error associated with the
protection job.