HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

430 of 739
4. Modify any of the options under Messages and Alerts, if necessary.
● Maximum Length—Specify the maximum length of the log file. The default
size is 1048576 bytes and is limited by the available hard drive space.
● Maximum Files—Specify the maximum number of log files that are
maintained. The default is 5 and the maximum is 999.
Note:
If you change the Maximum Length or Maximum Files, you must restart
the Storage Mirroring service for the change to take effect.
5. Click OK to save the changes.
Storage Mirroring Recover log messages
The following table describes some of the standard Storage Mirroring Recover alerts that
may be displayed in the log files.
Note:
In the following table, con_id refers to the unique connection ID assigned to
each connection between a source replication set and a target.
ID Message Description
0 N/A
There are several log messages with this ID#. See the
description in the Message column in the log file.
7
● Syn-
chronous
ioctl returned
STATUS_
PENDING
● Failed to
reset
Replication
Flags.
Replication
may not be
performed
correctly.
● Communication with the Storage Mirroring Recover
driver is not being performed correctly. A reboot is
required to guarantee replication and data integrity.
● An error occurred between the Storage Mirroring
Recover driver and recent changes to the
replication set. The possible resolutions are:
● Undo the changes to the replication set
● Stop and restart Storage Mirroring Recover
● Reboot the server
69
Double-Take
kernel started on
server_name
The Storage Mirroring service was started on the
Storage Mirroring Recover server specified.