HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

436 of 739
ID Message Description
53001
File was missing
from target
The verification process confirms that the files on the
target are identical to the files on the source. This
message would only appear if the verification process
showed that a file on the source was missing from the
target.
53003
Could not read
filename
Storage Mirroring Recover could not read a file on the
source machine because the file may have been
renamed or deleted. For example, temporary files show
up in queue but do not show up during transmission. (No
user action required.)
54000 Kernel started The Storage Mirroring service was started.
54001
Failover module
failed to load
The Storage Mirroring Recover failover module failed to
load. Look at previous log messages to determine the
reason.
54503
Failover module
stopped
The Storage Mirroring Recover failover module stopped.
99001
Starting source
module low
memory
processing
The source’s queue is full, and the auto-disconnect
process will disconnect the source and target connection.
The auto-reconnect process will automatically
reestablish the connection if the auto-reconnect feature is
enabled. If the auto-reconnect feature is not enabled, you
must first verify that the connection between the source
and target has been broken, and then manually
reestablish the connection in the Replication Console.
99999
Application is
terminating
normally
The Storage Mirroring service is shutting down normally.
503010
Asyncloctl for
status thread 178
terminated,
terminating the
status thread
A Storage Mirroring Recover process monitors the state
of the Storage Mirroring Recover driver. When the
service is shut down, the driver is shut down, and this
process is terminated. (No user action required.)