HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

486 of 739
specified date and time
● -STOP mm/dd/yyyy hh:mm—Filters out any data after the
specified date and time
● -SERVER ip_address port_number—Connects DTStat to the
specified IP address using the specified port number instead of to
the local machine
Examples
● DTStat -i 300
● DTStat -p -i 300 -t AlphaStats.sts
● DTStat -f AlphaStats.sts -s AlphaStats.csv -start 02/02/2007 09:25
● DTStat -server 206.31.4.51 1106
Notes
● This command is not case-sensitive.
● If no options are specified, DTStat will print the output to the screen
at an interval of every one second.
● If the statistics are not changing, DTStat will discontinue writing
until statistics begin updating again.
Statistics
The following table identifies the Storage Mirroring Recover statistics.
Note:
The categories you see will depend on the function of your server (source,
target, or both).
If you have multiple IP addresses connected to one target server, you will see
multiple Target sections for each IP address.
If you convert your statistics output to an ASCII, comma-delimited file using the
dtstat -s option, keep in mind the following differences.
● The statistic labels will be slightly different in the ASCII file than in the
following table.
● The statistics will appear in a different order in the ASCII file than in the
following table.
● The statistics in the Target Category in the following table are not included
in the ASCII file.
● The Kernel statistic Target Open Handles is not included in the ASCII file.
● The ASCII file contains a Managed Pagefile Alloc statistic which is no
longer used.