HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

504 of 739
Object
Type
Statistic Description
Connection dtConnectionCount
The number of active connections between
machines
Connection dtconIpAddress
The IP address of the connected machine. If at
the source, then the IP address of the target. If at
the target, then the IP address of the source.
Connection dtconConnectTime
The duration of time since the connection was
first established
Connection dtconState
The state of the active connection
● 0—None. This indicates a connection has
not been established. Statistics are still
available for the source and target
machines.
● 1—Active. This indicates that the
connection is functioning normally and
has no scheduling restrictions imposed on
it at this time. (There may be restrictions,
but it is currently in a state that allows it to
transmit.)
● 2—Paused. This indicates a connection
that has been paused.
● 4—Scheduled. This indicates a
connection that is not currently
transmitting due to scheduling restrictions
(bandwidth limitations, time frame
limitations, and so on).
● 8—Error. This indicates a connection that
is not transmitting because something has
gone wrong (for example, lost
connection).
Only the Scheduled and Error states can
coexist. All other states are mutually exclusive.
SNMP will display a dtconState of 12 when the
connection is in both a scheduled and an error
state because this is the sum of the two values
(4 + 8).