HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

594 of 739
4. From the Replication Set Properties dialog box, click Add.
5. Specify a path, wild card, or specific file name. Select the Include, Exclude, and/or
Recurse sub-directories attributes to be applied to this rule and click OK.
6. Repeat steps 3 and 4 to add additional replication set rules.
7. If you need to edit an existing rule, highlight it and click Edit.
8. If you need to remove a rule, highlight it and click Remove.
9. After the replication set rules have been defined, exit the Replication Set
Properties dialog box by clicking OK. Notice the replication set icon has changed
from black to red, indicating changes to the replication set rules. If you click Cancel
, your changes will not be reflected in the current replication set.
10. Right-click the replication set icon and select Save. A saved replication set icon
will change from red to black.
Modifying a replication set
Storage Mirroring Recover allows you to make modifications to a replication set when
you want to change the data you wish to protect. This allows you to add, remove, or
modify any replication set rules without having to create a new replication set.
1. Open the Replication Console.
2. In the left pane, highlight the replication set you want to modify and expand the
volume and directory levels as needed.
3. Modify the items by marking or clearing the volume, drive, directory, or file check
boxes. Notice the replication set icon has changed from black to red, indicating
changes to the replication set rules.
4. After updating the rules for this replication set, right-click the replication set icon
and select Save. A saved replication set icon will change from red to black.
Note:
If you save changes to a connected replication set, it is recommended that
you perform a mirror to guarantee data integrity between the source and
target machines. A dialog box will appear instructing you to disconnect
and reconnect the replication set and perform a difference mirror.
If your source is a cluster, you must make the same modifications to the
replication set on the non-owning nodes. The replication set rules must be
identical on all nodes for Storage Mirroring Recover to function properly
on the cluster.