HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

617 of 739
● Transmission session start—This option establishes a date and time of the
day to begin transmitting data. For example, you may want to specify a
transmission time that corresponds to a low bandwidth usage time. Once
started, Storage Mirroring Recover will continue to transmit data until the
queue is empty or until another limitation stops the transmission. Specify a
Date and Time to start transmitting data. The down arrow next to the date
field displays a calendar allowing easy selection of any date. The time field is
formatted for any AM or PM time.
● Session Interval—This option begins transmitting Storage Mirroring
Recover data at specified intervals of time. This option is used in conjunction
with Transmission session start. For example, if the Session Interval is
set to repeat transmission every 30 minutes and the Transmission session
start is set to begin transmitting at 10 PM, if the queue is emptied at 10:20 the
transmission will stop. The start criteria is again met at 10:30 and Storage
Mirroring Recover will begin transmitting any new data in the queue. Specify
an interval for additional transmissions by indicating a length of time and
choosing minutes, hours, or days.
● Queue Threshold (percentage) and Queue threshold (bytes)—If the
allocated amount of queue disk space is in use, Storage Mirroring Recover
cannot continue to queue data causing an auto-disconnect and the potential