HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

641 of 739
Adding users to the security groups
The security groups are automatically created during the installation process. The
groups are assigned specific case-sensitive names.
● Double-Take Admin
● Double-Take Monitors
The local administrator and the domain administrator are automatically added to the
Double-Take Admin group.
Note:
If Storage Mirroring Recover is installed on a member servers, it will use the
local groups. If an Active Directory user is granted access to the Active
Directory Double-Take Admin or Double-Take Monitors groups, the user or
domain group must also be granted access to the local Storage Mirroring
Recover groups. If Storage Mirroring Recover is installed on a domain
controller, the Active Directory group will provide sufficient access. The groups
are created in the Users OU and need to stay here. If the groups are not there,
users will be unable to log into Storage Mirroring Recover on the domain
controller.
Users that need administrator access to Storage Mirroring Recover must be added to the
Double-Take Admin group. All users that need monitor only access must be added to
the Double-Take Monitors group. In both cases, local users, domain users, or global
groups may be added to the local groups.
To add, delete, or modify users for a group, follow these steps.
1. Select Start, Programs, Administrative Tools, and User Manager. (If you are on
a domain controller, select User Manager for Domains.)
2. Double-click the group to be modified or highlight it and select User, Properties.
3. To add local users, domain users, and/or global groups to the group, click Add.
4. Select the local user, domain user, and/or global group to be included in the
security group.
5. Click OK to return to the Local Group Properties dialog box.
6. Click OK to return to the User Manager.
7. Exit the User Manager.