HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)
695 of 739
1. In the Service Listen Port field, enter the value for the Storage Mirroring Recover
port to be used for Application Manager communication. The default port is 6320.
Note:
The Application Manager Service Listen Port must be the same as the Storage
Mirroring Recover Service Listen Port on both the source and target servers.
You can also change the port through the Replication Console.
2. To specify the rate at which the Application Manager updates the protection status,
clear the Enable automatic adjustment of refresh interval checkbox, then enter
the desired Refresh Interval. You can enter a value between 1 and 30,000
seconds.
3. If you want the refresh interval to be updated automatically, select the Enable
automatic adjustment of refresh interval checkbox.
Note:
If the Application Manager appears to be running slowly, it may be because the
refresh interval is set to a long interval. Set a shorter refresh interval and make
sure that the automatic adjustment option is not selected.
4. In the Maximum log file size field, enter the maximum size for the
dtam.verbose.log file. When the maximum size is reached, the dtam.verbose.log
file is renamed to dtam.verbose.prev.log and subsequent actions are logged to a
new dtam.verbose.log file (Default = 1MB).