HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

92 of 739
● Click Browse to search for a machine. Select a domain from the list box at
the top of the Select Machine dialog box to list the available machines for that
domain. Highlight a source to be monitored and click OK.
● Click Custom. Enter the name of the server and click Add. Specify the IP
address and subnet mask of the specified server and click OK. Click OK
again.
The Insert Source Machine dialog closes and the Monitor Settings dialog remains
open with your source listed in the Names to Monitor tree.
6. In the Names to Monitor tree, locate and select the IP addresses on the source
that you want to monitor.
7. Highlight an IP address that you have selected for monitoring and select a Target
Adapter that will assume that IP address during failover. Repeat this process for
each IP address that is being monitored. Current IP Addresses displays the IP
address(es) currently assigned to the selected target adapter.
8. Highlight an IP address that you have selected for monitoring and select a Method
to Monitor for Failover.
● Network Service—Source availability will be tested for by a Storage
Mirroring Recover network response
● Replication Service—Source availability will be tested for by a Storage
Mirroring service response.
● Network and Replication—Source availability will be tested for by both a
Storage Mirroring Recover network response and a Storage Mirroring service
response.
● No Monitoring—Storage Mirroring Recover does not actively monitor the
source. You will be responsible for identifying when a failure has occurred
and initiating failover manually.
9. Repeat step 8 for each IP address that is being monitored.
10. Highlight an IP address that you have selected for monitoring and select a Monitor
Interval. This setting identifies the number of seconds between the monitor
requests sent from the target to the source to determine if the source is online. This
option is not configurable if your Method to Monitor for Failover is set to No
Monitoring. Repeat this step for each IP address that is being monitored.
11. Highlight an IP address that you have selected for monitoring and select the
Missed Packets. This setting is the number of monitor replies sent from the source
to the target that can be missed before assuming the source machine has failed.
This option is not configurable if your Method to Monitor for Failover is set to No
Monitoring. Repeat this step for each IP address that is being monitored.