HP StorageWorks Storage Mirroring Replicate User's Guide (T5437-96023, November 2010)

Job monitoring Page 129 of 214
4066 The product code requires a virtual server environment. The product
functionality has been disabled.
Error—The activation code you are using is for the Virtual SystemsTM
edition. This code will not work on non-virtual server environments.
4067 No replication ops have been received from the driver for an extended period
of time.
Error—Check other messages for errors with the Storage Mirroring drivers,
and correct as required. If there are no driver messages, verify that your
drives are connected to the source. If this error persists, contact technical
support.
4068 Failed to write to a replicating volume.
Error—Reboot the source server. Contact technical support if this event
occurs again.
4069 The option MoveOrphansDir has been updated because it was missing or
empty.
Warning—No action required.
4070 An error occurred while reading data for connection %1. All data needs to be
remirrored. See the log for details.
Error—Storage Mirroring will automatically remirror the data. See the
Storage Mirroring log file for details.
4096 The registry parameter %2 is unknown.
Warning—Delete the parameter and report this issue to technical support.
4097 Failed to initialize WMI support. The last Word in the Data Window is the NT
status code.
Warning—No action required.
4097 The file system filter failed to load. Replication will not occur. Reboot your
server and contact technical support if this error occurs again. The last Word in
the Data window is the NT status code.
Error—Reboot your server and contact technical support if this event
occurs again.
4098 The registry parameters failed to load, so the default configuration values will
be used. The last Word in the Data window is the NT status code.
Warning—No action required.