HP StorageWorks Storage Mirroring Replicate User's Guide (T5437-96023, November 2010)

Job monitoring Page 162 of 214
Kernel, CRC Thread Count
The number of commands being executed simultaneously on the target. In
a properly functioning environment, this number should never be greater
than the number of difference mirrors currently being executed on the
sources connected to this target. If the value grows larger than the number
of currently executing differences mirrors, that indicates there is an error
condition.
Kernel, Double-Take queue memory usage
The amount of system memory in use by the Storage Mirroring queue
Kernel, Driver Queue Percent
The amount of throttling calculated as a percentage of the stop replicating
limit
Kernel, Failed mirror operations
The number of mirror operations on the source that failed due to an error
reading the file from the disk
Kernel, Failed replication operations
The number of replication operations on the source that failed due to an
error reading the file from the disk
Kernel, Memory Pool Bytes Available
The amount of memory, in bytes, in the Storage Mirroring memory pool
that can be used for Storage Mirroring operations. When Storage Mirroring
is at or near idle, the pool bytes available and pool total bytes will at or
near equal. If Storage Mirroring is queuing, the pool bytes available will be
at or near zero and the pool total bytes will be larger (near 256 MB based
on default settings).
Kernel, Memory Pool Total Bytes
The amount of memory, in bytes, that Storage Mirroring has allocated for
memory pooling. When Storage Mirroring is at or near idle, the pool bytes
available and pool total bytes will at or near equal. If Storage Mirroring is
queuing, the pool bytes available will be at or near zero and the pool total
bytes will be larger (near 256 MB based on default settings).
Kernel, Mirror Kbytes generated
The number of mirror kilobytes transmitted from the source
Kernel, Mirror operations generated
The number of mirror operations transmitted from the source