HP StorageWorks Storage Mirroring Replicate User's Guide (T5437-96023, November 2010)

Source protection Page 62 of 214
E-mailing server event messages
E-mail notification sends specific Storage Mirroring Replicate events to user-defined e-
mail addresses. If you want to use e-mail notification, you will need to identify who will
receive the messages, what messages they will receive, and your e-mail server
configuration.
l Server—Select the server that you want to configure e-mail notifications for. E-mail
notification settings apply to all jobs for a server. Multiple jobs using a server, for
example, a repository server protecting several sources, will share the same e-mail
notification settings.
l Recipients—Specify the e-mail address that each Storage Mirroring Replicate e-
mail message should be sent to and click Add New. The e-mail address will be
inserted into the list of addresses. Each address is limited to 256 characters, and
you can add up to 256 e-mail addresses. If you want to remove an address from
the list, highlight the address and click Remove. If you want to remove all of the
addresses from the list, click Clear.
l Notifications—Specify which events that you want to be sent via e-mail. You can
select Error, Warning, and/or Information.
l Mail Server Setup—Specify your e-mail server configuration.
l Mail Server—Specify the name of your SMTP mail server.
l Log on to SMTP server—If your SMTP server requires a login, enable this
option and specify a User name and Password.