HP StorageWorks Storage Mirroring Replicate User's Guide (T5437-96023, November 2010)

Data on the repository server Page 68 of 214
l Available images—Select the image of the source that contains the data you
want to recover. If the image is not displayed, click Browse to look for the
location of the server image.
l Snapshot—Select this option and choose a snapshot from the list to mount
the data stored in that snapshot. If you did not enable snapshots or there
were no snapshots taken on the repository server, there will be no snapshots
in the list. For more information about snapshots, see the Snapshots section
in the Storage Mirroring Recover User's Guide.
l Specific time—Select this option and choose a specific date and time to
mount the data from that point in time. The table below the date and time
fields allows you to confirm that the Storage Mirroring Replicate data is valid
for the point in time you are selecting. If you did not enable continuous data
protection when you configured protection or if the TimeData initialization
has not completed, this option will not be available.
5. Click Finish. If you are completing this task from the repository server, the data
from the image and point-in-time strategy you selected will be mounted
automatically and a Windows Explorer window will open to the mount point. If you