HP StorageWorks Storage Mirroring Replicate User's Guide (T5437-96023, November 2010)

Recovery Page 88 of 214
l Wait for user intervention before recovery—Specify if you want to pause
the recovery process after the original source image has been mirrored to the
Virtual Recovery Appliance (the existing virtual machine), which allows you
time to coordinate any other tasks. If you do not pause the recovery, after the
mirror the Virtual Recovery Appliance will immediately unmount the disk(s),
remove them, and start the new virtual machine.
l Shut down the source server—Specify if you want to shutdown the source
server before the new virtual machine is started, which avoids identity
conflicts on the network.
l Original Protection Job—Specify what to do with the original protection job
if the original source is still online. If the original source is not running, these
options will be discarded because they cannot be performed.
l Delete the original protection job—The original protection job is
stopped and then deleted.
l Stop the original protection job—The original protection job is
stopped but is not deleted. It can be restarted after the recovery.
l Leave the original protection job running—The original protection
job is not stopped or deleted. Keep in mind with this option that the data
on the recovery server could become inconsistent or corrupted because
the original source protection job could be transmitting data to the
repository server and that data might get transmitted to the recovery
server, depending on the progress of the recovery process.
17. Click Next to continue.
18. At the Recovery summary page, you can review the choices you have made and
you can also configure optional settings. If you need to make any changes to the