HP StorageWorks Storage Mirroring Replicate User's Guide (T5437-96023, November 2010)

Recovery Page 91 of 214
l Live data—Select this option to recover to the live data that is currently
stored on the repository server.
l Snapshot—Select this option and choose a snapshot from the list to recover
to the data stored in that snapshot. If you did not enable snapshots or there
were no snapshots taken on the repository server, there will be no snapshots
in the list.
l Specific time—Select this option and choose a specific date and time to
recover the data from that point in time. The table below the date and time
fields allows you to confirm that the Storage Mirroring Replicate data is valid
for the point in time you are selecting. If you did not enable continuous data
protection when you configured protection or if the TimeData initialization
has not completed, this option will not be available.
3. Click Next to continue.
4. Select the recovery server. This is the Hyper-V server that will host the virtual
machine that, after the recovery, will become your new source.
l Provision a new virtual machine for this recovery—Enable this option to
recover to an automatically provisioned virtual machine hosted on a Hyper-V
server.
l Server—Specify the name of the Hyper-V server. You can also click Browse
to select the name from Active Directory or from a network drill-down list.
l User name—Specify a user that is a member of the Double-Take Admin
security group on the recovery server. If your original source was the only
domain controller in your network, you must specify a local account in the
local administrators group on the recovery server.