HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

6 - 2
2. Use the Storage Mirroring status command to display statistical and informational data.
For details on other monitoring methods, see the Storage Mirroring User’s Guide.
Notes
 The conid list and variable=conid commands are two separate
commands.
 If no machine name is specified in the conid list command, the active
source will be used.
 Options that contain non-alphanumeric characters must be enclosed in
quotation marks.
Command STATUS
Description Requests connection and statistical information
Syntax
STATUS BLOCK [ON <target>]
| CONNECT <
con_id>
| MIRROR <
con_id>
| REPLICATE <
con_id>
| TRANSMIT <
con_id>
| TARGET <target>
Options  BLOCK—Displays whether replication set path on the specified target is
being blocked
 target—Name of the target, an IP address on the target, or a virtual IP
address
 CONNECT—Displays connection information for the connection ID
specified
 con_id—Connection ID assigned to the source/target connection
 MIRROR—Displays mirroring information for the connection ID specified
 REPLICATE—Displays replication information for the connection ID
specified
 TRANSMIT—Displays transmission information for the connection ID
specified
 TARGET—Displays target state information for the target machine
specified
Examples
 status connect 1
 status replicate 1
 status target beta
Notes Target names that contain non-alphanumeric characters must be enclosed in
quotation marks.