HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

15 - 2
The following table lists all of the Storage Mirroring server settings, in decimal values.
Storage Mirroring Server Settings
Notes
 Some settings, although immediately applied to Storage Mirroring, will
not take effect until the service is restarted.
 If you do not specify a machine name, the value from the current source
will be updated. If you have not identified an active source, no changes
will be made.
 Options that contain non-alphanumeric characters must be enclosed in
quotation marks.
Server Setting Description
ActivationCode 16- or 24-character Storage Mirroring activation code
Values: Unique value for each customer
Default: N/A
GUI Setting: Server Properties, Licensing tab, Activation Code
AdapterFlags Specifies the adapter to use when establishing a connection. This option
should not be changed.
Values:
2 Encryption
4 Network Data Representation
Default:
4
GUI Setting: None
AddOnCodes 16- or 24-character activation code for specific add-on components
Values: Unique value for each customer
Default: N/A
GUI Setting: Server Properties, Licensing tab, Additional Codes
Advertisement Indicates if the server uses Active Directory to advertise itself so that the
Management Console can populate the server tree
Values:
0 Do not use Active Directory advertisement
8 Use Active Directory advertisement
Default:
8
GUI Setting: Server Properties, Setup tab, Advertise service with Active
Directory
If Active Directory advertisement is enabled, there is a 200 byte impact on
the Active Directory service for each server that registers. The Storage
Mirroring service registers with Active Directory at startup and unregisters at
shutdown.
AllFailover Specifies which IP addresses to failover
Values:
0 Failover only monitored IP addresses
1 Failover all IP addresses
Default:
1
GUI Setting: Failover Control Center, Monitor Settings, Items to Failover, IP
Address(es)