HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

15 - 11
FailoverOnRoute
Failure
Determines if failover will occur when receiving a router message back from
an IP address on the network
Values:
0 Failover will not occur when receiving a destination host
unreachable message
1 Failover will occur when receiving a destination host unreachable message
Default:
1
GUI Setting: None
FCCHelpPath The path and file name to the Failover Control Center online help file
Default:
C:\Program Files\StorageWorks\Storage
Mirroring
\online help\fcc\ wwhelp.htm
GUI Setting: None
Do not change this value or the online help will not work.
FileAccessRetry The number of times a failed driver call will be retried by the service.
Values: 1 - 65535
Default: 10
GUI Setting: None
FileQueueSize When a mirror is started, one thread reads from the disk and builds the file
queue. Another set of threads reads files off of the queue and sends them to
the target. This setting is the maximum size of the queue in entries. If you
had 100 files to be mirrored and this was set to 16 (the default value), the
first thread would fill the queue to a maximum of 16 entries.
Values:
1 - 65535
Default:
16
GUI Setting: None
This value must be set prior to starting the mirror process. The higher the
number, the more memory that is used.
ForceReplaceOn
Failover
Specifies additional failover options
Values: 0 Use standard failover add / replace settings with no additional
settings
1 Replace the target server name with that of the source and add the source
IP
address
2 Add the source server name to the target and replace the target IP address
3 Replace the target server name with that of the source and replace the
target IP
address
Default:
0
GUI Setting: Failover Control Center, Monitor Settings, Failover Method
ForceVerifyOn
Mirror
Specifies if verification will be performed with every difference mirror
Values: 0 Verification is not performed with every difference mirror
1 Verification is performed with every difference mirror
Default:
0
GUI Setting: None
Server Setting Description