HP StorageWorks Storage Mirroring user's guide (T2558-96073, February 2008)

19 - 19
5502 Service Warning E-mail notification could not be
initialized. Check to make sure Internet
Explorer 5.0 or later is installed.
E-mail notification requires Internet
Explorer 5.0 or later. Verify that you
have this version or later installed on
the Storage Mirroring server.
5503 Service Warning E-mail notification could not be
processed. Check to make sure the
correct version of SMTPMail.DLL is
registered on the system (error code:
%1).
If you are using Storage Mirroring
4.4.2.1 or earlier and Windows NT 4.0,
e-mail notification requires Windows
Management Instrumentation (WMI)
to be installed. Verify that you have it
installed on the Storage Mirroring
server.
5504 Service Warning Could not load LocalRS.dll (for e-mail
notification).
This alert occurs if there is an error
loading the resource DLL for the
service. Typically, this is caused by a
missing LocalRS.dll file. Reinstall the
software, using the installation Repair
option, to install a new copy of the
LocalRS.dll. Contact technical support
if this error persists.
5505 Service Warning E-mail could not be sent. Check e-mail
settings (error code: %1).
Verify that the e-mail server that you
have identified in your e-mail
notification configuration is correct.
5506 Service Warning One or more required e-mail settings
have not been specified (error code:
%1).
At a minimum, you must specify the
e-mail server, the From and To
addresses, and at least one type of
event to include.
5507 Service Warning E-mail notification could not be
initialized. Check to make sure WMI is
installed and available (error code: %1).
If you are using Storage Mirroring
4.4.2.1 or earlier and Windows NT 4.0,
e-mail notification requires Windows
Management Instrumentation (WMI)
to be installed. Verify that you have it
installed on the Storage Mirroring
server.
5508 Service Warning An error occurred connecting to the
WMI namespace. Check to make sure
the Windows Management
Instrumentation service is not disabled
(error code %1).
This alert occurs if there is an error
with the Windows Management
Instrumentation (WMI) service. Verify
that you have it installed on the Storage
Mirroring server and that it is enabled.
5600 Service Warning Part or all of the e-mail setting %1 is
not in a valid format.
Verify that the include categories and
exclude ID list are identified and
formatted correctly. Make changes
through the Text Client or the
Management Console.
8192 Resources Warning Kernel memory was exhausted.
Replication is stopped.
Contact technical support if this event
occurs again.
8192 Resources Error Failed to create device list entry due to
insufficient resources.
Contact technical support if this event
occurs again.
8193 Resources Error Failed to create Transfer Thread. The
last Word in the Data Window is the
NT status code.
Reboot the server and contact
technical support if this event occurs
again.
8194 Resources Error Failed to create filename work queue.
The last Word in the Data Window is
the NT status code.
Reboot the server and contact
technical support if this event occurs
again.
8195 Resources Error Failed to create file close queue. The
last Word in the Data Window is the
NT status code.
Reboot the server and contact
technical support if this event occurs
again.
ID Category Severity Event Message Required Response