HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Install - Set IP Address Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set IP Address,SVP&DKC,Normal end,,,
Seq.=xxxxx
+{IPAdd,Subnet,Use Duplex,SVP Kind,M-SVP IPAdd,M-SVP Sunbet,
S-SVP IPAdd,S-SVP Subnet}=
{(123.456.789.123),(255.255.255.255),Valid,Master SVP,(111.222.333.444),
(255.255.255.255),
(555.666.777.888),(255.255.255.255)}
[Install]
Install function
Set IP Address
Set IP Address operation
SVP&DKC
SVP&DKC is the selected parameter. This operation uses the following parameters, as shown in the
following table.
Table 76 Parameters: Set IP Address Operation
DescriptionParameter
Change of the IP address for SVPSVP
Change of the IP address for SVP and DKCSVP&DKC
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 77 Detailed Info: Set IP Address Operation
DescriptionItem
The IP address in SVP.IP Add
The subnet mask in SVP.Subnet
Indicates whether the Duplex setting in SVP is valid or invalid.Use Duplex
Valid: Valid, Invalid: Invalid
The kind of duplicated SVP.SVP Kind
Master SVP: Master SVP, Standby SVP: Standby SVP.
The IP address of Master SVP.M-SVP IP Add
XP24000 Audit Log User and Reference Guide 101