HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

DescriptionItem
The subnet mask of Master SVP.M-SVP Subnet
The IP address of Standby SVP.S-SVP IP Add
The subnet mask of Standby SVP.S-SVP Subnet
Install - Set Security Switch Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Security Switch,,Normal end,,,
Seq.=xxxxx
+{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2
[Install]
Install function
Set Security Switch
Set Security Switch operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 78 Detailed Info: Set Security Switch Operation
DescriptionItem
The name of the port where the LUN security setting is changed.Port
Indicates whether the LUN security setting is enabled or disabled.Switch
Disable or Enable is output.
The number of ports where the LUN security setting is changed.Num. of Ports
Install - Set Speed Mode Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Speed Mode,,Normal end,,,Seq.=xxxxx
+CHA=CHA-1E
++{Port Block,Mode}=[{A,High Speed},{B,High Speed}Num. of Blocks=2
+CHA=CHA-1H
++{Port Block,Mode}=[{A,Standard},{B,High Speed}],Num. of Blocks=2
+Num. of CHAs=2
[Install]
Sample Audit Logs102