HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

+{LPR,Cache Tuning}=[{System,Level5}],Num. of LPRs=1
+{LPR,Command Control}=[{System,10}],Num. of LPRs=1
+{LPR,Mode,Set}=[{System,0,ON}],Num. of Modes=1
+Debug Mode=Set
[Install]
Install function
System Option
System Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 82 Detailed Info: System Option Operation
DescriptionItem
Indicates the setting status of Spare Disk Recover.Spare Disk Recover
Interleave: Give priority to the access from the host while executing copy process, Full
speed: Give priority to the copy process.
Indicates the setting status of Disk Copy Pace.Disk Copy Pace
Slower: Low speed, Medium: Medium speed, Faster: High speed
Indicates the setting status of Copy Operation (Correction Copy).Copy Operation
ON: Execute Correction Copy, OFF: Do not execute Correction Copy(Correction Copy)
Indicates the setting status of Copy Operation (Dynamic Sparing).Copy Operation
ON: Execute Dynamic Sparing, OFF: Do not execute Dynamic Sparing(Dynamic Sparing)
The method to allocate the serial number reported by Read Configuration Data command.Read Configuration
Data Mode
ON: Method supporting 4096, OFF: Traditional compatible method
The operation when power supply is lost.Power Lost Mode
Memory Backup Mode: Set to Memory Backup Mode
Destage Mode: Set to Destage Mode
The cache segment sizeCache Segment
Size
The size of the cache on Side A.SideA
The size of the cache on Side B.SideB
The threshold to report link failure.Link Failure
Threshold
XP24000 Audit Log User and Reference Guide 105